1.1.28inch Touch LCD Display Module
Embedded GC9A01 Driver And CST816S Capacitive Touch Control Chip
Using SPI And I2C Communication Respectively
Comes with examples for Raspberry Pi, Raspberry Pi Pico, Arduino, STM32, etc.
2.Small Size, Touch More Possibilities
Suitable For Various Smart Devices Development, Can Realize Human-Computer
Interaction Function
3.Control Interfaces For Use With Controller Boards Like Raspberry Pi / Raspberry Pi Pico / Arduino / STM32
VCC—Power (3.3V / 5V input)
GND—Ground
MISO—SPI MISO pin
MOSI—SPI MOSI pin
SCLK—SPI Clock pin
LCS_CS—LCD Chip Selection, low active
LCS_DC—LCD Data/Command selection (high for data, low for command)
LCS_RST—LCD Reset, low active
LCS_BL—LCD Backlight
TP_SDA—TP Data pin
TP_SCL—TP Clock pin
TP_INT—TP Interrupt pin
TP_RST—TP Reset, low active
Specifications
OPERATING VOLTAGE—3.3V
DISPLAY DRIVER—GC9A01
TOUCH DRIVER—CST816S
DISPLAY PANEL—IPS
DISPLAY SIZE—Φ32.4mm
RESOLUTION—240 × 240 pixels
MODULE SIZE—39.89 × 38.50mm Φ38.50mm
DISPLAY INTERFACE—4-wire SPI
TOUCH INTERFACE—I2C
TOUCH TYPE—Capacitive
PIXEL SIZE—0.135 × 0.135 mm
LCD and Controller
This LCD adopts built-in driver GC9A01 with a resolution of 240RGB × 240 dots, which has an internal GRAM of 129,600 bytes. It supports MCU port with 12/16/18 data bus, that is, the common RGB format of RGB444, RGB565, and RGB666.
Development Resources
https://www.waveshare.com/wiki/1.28inch_Touch_LCD?Amazon
Package Content
1.28inch Touch LCD x1
GH1.25 13Pin cable x1
Avis
Il n’y a pas encore d’avis.